Gas Line for a Generator, Fire Pit or BBQ in Silverdale, WA
A gas line for a standby generator, fire pit or BBQ in Silverdale costs about $300 to $2,100. Here is how Kitsap County permits it and how the pipe is sized.
LICENSED GAS LINE SPECIALISTS
Gas Piping & Gas Line Services — Kitsap County, Gig Harbor & Tacoma, WA
Gas line work requires a licensed plumber, the right equipment, and zero margin for error. Pelican Plumbing installs, repairs, and extends natural gas and propane lines for homes and businesses throughout Kitsap County, Gig Harbor and Tacoma.
Request a Gas Line Estimate
"*" indicates required fields
CUSTOMER REVIEWS
What Our Gas Piping Customers Say
RESIDENTIAL & COMMERCIAL GAS PIPING
Safe, Code-Compliant Gas Line Installation
Whether you are adding a gas range, connecting a tankless water heater, extending a line to a new outdoor grill, or running propane to a shop heater, every joint and fitting must meet Washington State fuel-gas code. We handle the full scope:
- New gas line runs — black iron, CSST (corrugated stainless steel tubing), and copper where code allows
- Gas appliance hookups — ranges, dryers, fireplaces, furnaces, water heaters, generators, and pool heaters
- Line extensions and re-routes — adding branch lines from existing manifolds or meters
- Leak detection and repair — electronic leak detection, pressure testing, and joint repair
Every installation is pressure-tested before we turn the gas on and leave the job.
OUR GAS PIPING SERVICES
From Meter to Appliance — We Handle It All
Pelican Plumbing provides end-to-end gas piping for residential and commercial projects across Kitsap County, Gig Harbor and Tacoma. Every job is permitted, inspected, and built to last.
New Construction Gas Lines
Complete rough-in and finish gas piping for new homes and commercial build-outs. We coordinate with HVAC, electrical, and general contractors to get manifolds, drops, and appliance connections right the first time.
Gas Line Repairs & Leak Detection
Smell gas or suspect a leak? We respond quickly with electronic leak detectors and pressure-decay testing to isolate the problem. Repairs include joint re-sealing, section replacement, and full re-testing before sign-off.
Appliance Hookups & Conversions
Adding a gas range, converting from electric to gas, or connecting a standby generator? We size the line, pull the permit, run the pipe, and verify BTU capacity so every appliance gets the flow it needs.
WHY HIRE A LICENSED GAS PLUMBER
Gas Work Is Not a DIY Project — Hire a Licensed Professional
Washington State requires a licensed plumber for all fuel-gas piping. Unlicensed work voids insurance, fails inspection, and puts your family at risk. Pelican Plumbing carries the proper plumber license, gas-piping endorsement, and liability coverage for every job.
We pull the permit, schedule the inspection, and stand behind the work. If a joint leaks or a fitting fails within our warranty period, we come back and fix it at no charge.
WHY KITSAP COUNTY TRUSTS PELICAN
The Pelican Plumbing Difference
Licensed & Insured
Full Washington State plumber license with gas-piping endorsement. Bonded and insured for residential and commercial fuel-gas work.
Pressure-Tested Every Time
Every gas line we install or repair is pressure-tested to code before we restore service. No exceptions, no shortcuts.
Permit & Inspection Handled
We pull the gas permit, coordinate the inspection, and make sure everything passes on the first visit. You never have to call the building department yourself.
Transparent Pricing
Upfront written estimates before work begins. No hidden fees, no surprises on the final invoice. We charge fairly for quality gas piping work.
FREQUENTLY ASKED QUESTIONS
Gas Line Installation FAQs for Kitsap County, Gig Harbor & Tacoma
Do I need a licensed plumber to install a gas line in Washington?
Yes. Washington State requires a licensed plumber for all fuel-gas piping, and unlicensed work can void your insurance and fail inspection. Pelican Plumbing is licensed, bonded and insured in Washington, with a gas-piping endorsement and 7+ years of experience.
Do you pull the gas permit and handle the inspection?
Yes. We pull the gas permit, schedule and coordinate the inspection, and pressure-test every line we install or repair before the gas is turned back on, so you never have to call the building department yourself.
Can you run a gas line for a new range, generator or outdoor grill?
Yes. We hook up ranges, dryers, fireplaces, furnaces, water heaters, standby generators, pool heaters and outdoor grills, and handle electric-to-gas conversions, on natural gas or propane, for homes and businesses. We size the line, pull the permit, run the pipe in black iron, CSST or copper where code allows, and verify BTU capacity so every appliance gets the flow it needs.
What should I do if I smell gas?
Leave the building right away, do not flip switches or use anything that could spark, and call your gas utility or 911 once you are outside. Then call us at (360) 551-1981: we isolate the leak with electronic leak detectors and pressure-decay testing, repair it and re-test the line before sign-off.
How much does gas line installation cost in Kitsap County?
It depends on the length of the run, the pipe material and the appliances you are connecting, so we quote each job. Estimates are free and written upfront, with no hidden fees. For typical price ranges and permit steps, see our gas line installation cost guide for Kitsap County.
Where do you install gas lines?
We are based in Bremerton at 4181 Wheaton Way and install and repair gas lines across Kitsap County, including Bremerton, Silverdale, Port Orchard, Poulsbo and Bainbridge Island, plus Gig Harbor and Tacoma.
Need Gas Line Work? Call Pelican Plumbing Today.
From new gas line installations to leak repairs and appliance hookups, Pelican Plumbing delivers safe, code-compliant gas piping across Kitsap County, Gig Harbor and Tacoma. Call now or book online for a free estimate.
Other Services We Offer in Bremerton:
Find Gas Line Installation & Repair Near Me:
Read More:
How to Prevent Frozen Pipes in Kitsap County, WA
Kitsap County homes sit over vented crawl spaces with hose bibs on every wall, so one 16-degree night splits pipes. Prevention, safe thawing and repair costs.
Sewer Scope Inspection Cost in Kitsap County
Most Kitsap County sewer scopes cost $200 to $300. What raises the price, when a scope is worth it, what the camera finds, and how it differs from a septic PCI.
How to Tell If Your Main Line Is Clogged in Kitsap County
Two or more drains backing up at once means the main line, not the fixture. How Kitsap County homeowners confirm it, what causes it, and what clearing it costs.
Clogged Drain Repair in Kitsap County, WA: Costs & When to Call
Most Kitsap County drain clogs clear in under an hour for $110–$275. Learn how to tell a single clog from a main line blockage, and when to call a plumber.
